Артикул	Наименование	Цена
7010462	Труборез Pipecut 170 Electric Cutter EXACT Pipecut 170	85 335 р.

Cutter electric models Exact Pipecut 170 - unparalleled innovative equipment for cutting pipes. It is designed for cutting pipes, external diameter of which is within the 15-170 mm. Electric cutter can be used for steel products, and for iron, aluminum, asbestos, copper, metal, and manufactured from other materials..

Today, cutting steel pipe is run through a slow and heavy hand-cutters or grinders dangerous, make it impossible to achieve precise and accurate cutting. Electric cutter self-contained and completely safe in operation, its operation is simple and straightforward, is not associated with risk and does not require labor-intensive operations. In this case the weight is practically does not exceed the manual cutter for cutting steel pipe.

Thanks to the high-tech system Pipecutting System unit does not need a large workspace. Application of an electric cutter for cutting steel and other pipe does not require special skills and operator training. Forming a perfectly clean cut, immediately ready for further use, electric pipe cutter, as opposed to hand-held models does not create sparks and dust, not scatter chips and requires the support and direction.

Electric cutter, equipped with a diamond disc Diamond, allows for 30 seconds to cut 90-100 mm steel pipe. Buy Cutter you can call us or send a request to your email.

The advantages of electric cutter Exact Pipecut 170

• Ease of use.
  During the operation the weight 170 Exact Pipecut affects only on the cut pipe that allows you to safely use a pipe cutter, even in tight spaces. For the implementation of cutting enough 1 sq.m. working area. Pipes with large dimensions and weight, you can not put on the bench, cutting them by on the floor. Unlike a manual cutter, Exact Pipecut 170 does not need direction and support. Foothold on the tube, it operates independently and can not slip out of hands.

• Finished cut.
  Cutter for steel pipes Exact Pipecut 170 in the process of forming just perfectly clean cut, ready for connection. Once securely on the product of the electric knife cutter automatically placed in the correct position without the need for further direction. Smooth, free from burrs and burr section is formed due to the modern way of cutting - edge "prostragivaet" rather than grinds the pipe. Such a method of processing eliminates the appearance of dangerous sparks and metal dust.

• Safety.
  Additional security model of the cutter 170 is ensured Exact Pipecut guard. Formed in the process of cutting chips, cools rapidly, falling in the immediate vicinity of the pipe. It is not damaged even sensitive to external influences surface. Using a pipe cutter electrical needs careful not harboring the working area required when using hand-held devices.

Specification cutter electric models Exact Pipecut 170

Specifications
Power consumption	1010 W
Rotational Speed ??	4000 rev / min
diameter cutting disc	140 mm
Bore	62 mm
Diameter pipe cutting	15-170 mm
MAX pipe wall thickness (steel)	6 mm
MAX pipe wall thickness (plastic)	14 mm

Trim cutter electric models Exact Pipecut 170

• cutter model Exact Pipecut 170 ;
• bag;
• stand pipe (4 pc .);
• key to lock the disk;
• disk TST;
• instruction in Russian;

Accessories cutter electric models Exact Pipecut 170

1. TST-ROM art: 7010486
   Designed for cutting copper, aluminum, plastic and steel pipes of all kinds. Cutting width is 1.8 mm, working diameter - 140 mm, mounting - 62 mm. The teeth are made of metal of high hardness. discs allow re-sharpening TCT (2-3) and installed on an electric cutter, cut easily multilayer pipes. For steel pipe wall thickness is 4.5 mm and diameter - 168 mm, number of cuts approximately is 150-180.

Bore	0.062 m
The material of the teeth	metal of high hardness
Cutting width	0.0018 m
Diameter	0.14 m
Number of teeth	46
Rim size	0.062 m

2. CERMET-drives art: 7010496
   Used for cutting titanium and steel pipes, stainless steel, as well as cutting the copper, aluminum and plastic products. Cutting width is 1.8 mm, working diameter - 140 mm, mounting - 62 mm. The teeth are made of durable ceramic alloy. Wheels allow for re-sharpening CERMET (2-3). For stainless steel tube, the wall thickness of which - 3 mm, and diameter - 168 mm, number of cuts is estimated at 30-35 and for the steel pipe wall thickness is 4.5 mm and diameter - 168 mm, number of cuts is estimated at 200-300.

Width of cut	0.0018 m
Number of teeth	46
Diameter	0,14 m
The material of the teeth	ceramic alloy
Bore	0.062 m
Steel body	0.0015 m
Rim size	k0.062 m

3. DIAMOND-drives art: 7010491
   Used for cutting cast iron pipe. may not be re-sharpened! Cutting width is 2.5 mm, working diameter - 140 mm, mounting - 62 mm. The teeth are made of diamond alloy. For cast iron pipe, wall thickness is 3 mm and diameter - 114 mm, number of cuts is estimated at 1,000-1,500.

   Width of cut	0.0025 m
   Number of teeth	46
   Bore	0.062 m
   The material of the teeth	alloy diamond
   Diameter	0.14 m
   Rim size	0.062 m

Specification cutter electric models Exact Pipecut 170

Nimenovanie	Exact Pipecut 170
Marking	Pipecut 170
Food	230 V, 50/60 Hz
Power	1400 W
Rotational speed	4000 rev / min
The diameter of the pipe	15 mm - 200 mm
MAX pipe wall thickness (steel)	8 mm
MAX pipe wall thickness (plastic)	25 mm
Diameter holes for attaching the blade	62 mm
Diameter of disc TST	140 (155) mm
The thickness of the TST drive	2 mm
Weight	14,3 kg